Author Topic: Precise Spindle 45k RPM - Knee Mill  (Read 2472 times)

0 Members and 1 Guest are viewing this topic.

Offline royce

  • Active Member
  • Posts: 37
    • View Profile
Precise Spindle 45k RPM - Knee Mill
« on: May 29, 2017, 03:32:27 PM »
This is a precise spindle with a 0.75" shaft that spins up to 45krpm. Perfect for engraving on a knee mill, or micromilling. Spindle will fit in a 0.75" collet, 8-1/4" TLO to table. Includes an extra set of brushes, 1/4" and 1/8" SRP6 Collets, wrenches, directions.

Link to pictures.

Asking $650 + S/H to US Lower US 48.
Bridgeport Series 1 Rigid Ram Retrofitted w/PMDX126 BOB, PMDX107, Hitachi WJ200 VFD,ESS, Leadshine DM2282 Drivers running Mach4 comfortably.