Hello Guest it is June 19, 2021, 02:47:00 AM

Author Topic: Mach3 Auto Z Won't Retract  (Read 5644 times)

0 Members and 1 Guest are viewing this topic.

Offline ger21

*
  • *
  •  6,292 6,292
    • View Profile
    • The CNC Woodworker
Re: Mach3 Auto Z Won't Retract
« Reply #20 on: April 28, 2016, 06:18:01 PM »
The Digitize LED should light up when you touch the plate.

The macro I posted above should be working, so I don't know what else it could be.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html