Hello Guest it is September 28, 2021, 12:53:44 PM

Author Topic: SCARA Robot Arm  (Read 2321 times)

0 Members and 1 Guest are viewing this topic.

SCARA Robot Arm
« on: April 14, 2016, 03:11:15 AM »
Hi guys! I got this realy cool old robot arm and want to make it litle cnc mill. I use mach3 to control stepers and all looks fine but have no idea how to generate gcode  for this toy:) This one is small 40 cm but got 1 more 1.5 m some construction and will be trade it for litle help cnc parts!

Offline Tweakie.CNC

  • *
  •  8,807 8,807
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: SCARA Robot Arm
« Reply #1 on: April 14, 2016, 03:42:23 AM »
What an excellent little robot arm.

The subject of kinematic control comes up from time to time and there has been one solution put forward but (to my knowledge) it has not yet been independently proven to work successfully. Perhaps this is your opportunity to put it to the test and prove that it works ? – this thread refers; http://www.machsupport.com/forum/index.php/topic,32107.0.html

Currently, your type of robot arm can be successfully used with Mach3 for repetitive tasks by using the NFS 'CopyCat' Wizard to generate the Gcode. A 'Teach' program is perhaps not what you are looking for but Mach3 was never really designed for kinematic control in the first place.

Good fortune with your project.