Hi Daniel
thanks for yor reply. But it works not for me.
I have try all ways but nothing works correct.
Here are a Short description
- Install Mach4 and pokey plugin
- Enable pokey plugin and add new device
- Enable integrated 3ch pulse engine confirm all
- Restart Mach4 and select pokey as motion controller
- Setup motor parameters counts and speed
MDI = G0 x5 ......axis moved !!!!!
Very Easy!
Now i will setup my home and limit switchs
By default i have this settings
My limits switch are on pokeys pin 35/36/37
Now i can trigger home and limit
https://dl.dropboxusercontent.com/u/60701703/Foren/Pic3.pngAND NOW if i enter the Mach configure menu all settings for home and limit are set to default
The second way
I go to the pokeys plugin setup/ Pulse engine and setup there my switches.
Now i can trigger home and Limit
AND NOW if i enter the Mach configure menu all settings for home and limit are set to default
In the pokeys plugin configruation
What is wrong
??
What are the Default Pins for the pulse engine home and Limit Switches?
Why.....
thanks
Tom