Hello Guest it is March 28, 2024, 01:17:09 PM

Author Topic: Mach3 Controlled embroidery Machine  (Read 10213 times)

0 Members and 1 Guest are viewing this topic.

Offline khalid

*
  •  213 213
    • View Profile
    • My Wood carving
Re: Mach3 Controlled embroidery Machine
« Reply #20 on: February 03, 2016, 11:43:22 AM »
BR549, I already posted the Gcode generator software in the initial posts  that takes *.DST file (Tajima embroidery Format) and spit out Gcode for it... 
Here is the attached Gcode... I am also working on the Gcode Generator for multi-needle embroidery machine...

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Mach3 Controlled embroidery Machine
« Reply #21 on: February 03, 2016, 03:13:47 PM »
Is the machine that is shown your machine or someone elses ?? I have some questions on the setup of the machine.

(;-) TP

Offline khalid

*
  •  213 213
    • View Profile
    • My Wood carving
Re: Mach3 Controlled embroidery Machine
« Reply #22 on: February 04, 2016, 01:38:29 AM »
Brian,
I just developed the software and this is tested by Kiefer on his machine. He is using UC100 with Mach3. X and Y axis are controlled with stepper whereas the rotation of wheel is done by Servo.
More information can be shared.