Hello Guest it is April 14, 2021, 11:02:21 PM

Author Topic: Sign Making with Different Thicknesses of Materials  (Read 2857 times)

0 Members and 1 Guest are viewing this topic.

Offline BR549

*
  •  6,952 6,952
    • View Profile
Re: Sign Making with Different Thicknesses of Materials
« Reply #10 on: January 29, 2016, 06:52:41 PM »
Gary how accurate are the low end lasers these days . Use to be they were not that accurate AND rellied a great deal on surface finish.
Re: Sign Making with Different Thicknesses of Materials
« Reply #11 on: January 29, 2016, 07:08:46 PM »
............. AND relied a great deal on surface finish.

.......  and this is "Rough Cut" lumber, not even a planed or milled surface.

Offline BR549

*
  •  6,952 6,952
    • View Profile
Re: Sign Making with Different Thicknesses of Materials
« Reply #12 on: January 29, 2016, 07:16:05 PM »
With a simple linear scale one could measure the surface height as the board  was loaded
Re: Sign Making with Different Thicknesses of Materials
« Reply #13 on: February 01, 2016, 06:18:14 AM »
Hey guys, love all the ideas, that's why I come to this forum.  Thanks so much for all your replies and ideas.  I learn something new every time I come here.  I will take all ideas under advisement.  Have an awesome day cutting something on your CNC!

Bill