Hello Guest it is October 14, 2019, 02:52:41 PM

Author Topic: Redraw toolpath  (Read 4260 times)

0 Members and 1 Guest are viewing this topic.

Offline Hood

*
  •  25,855 25,855
  • Carnoustie, Scotland
    • View Profile
Re: Redraw toolpath
« Reply #10 on: January 23, 2016, 05:05:43 PM »
Here is one I came up with from 6 or so years ago :D
http://www.machsupport.com/forum/index.php/topic,12227.msg78726.html#msg78726

I can remember when I used to press the Display button it would do the regen then all of a sudden it stopped working so I had to add that code to the button. Why it ever changed I have no idea, not sure whether it originally had the DoOemButton code or whether it was automatic.
Hood

Offline ger21

*
  • *
  •  6,288 6,288
    • View Profile
    • The CNC Woodworker
Re: Redraw toolpath
« Reply #11 on: January 23, 2016, 05:13:21 PM »
DoOemButton replaced DoButton many years ago.
I would suggest using DoOEMButton for everything. All the codes are in the Wiki. At least all the documented ones.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html