Hello Guest it is January 17, 2021, 10:04:16 AM

Author Topic: Jogging during pause  (Read 2929 times)

0 Members and 1 Guest are viewing this topic.

Jogging during pause
« on: January 16, 2016, 09:30:36 AM »
Created my first screen from scratch and the jog behavior is a little different, I must be missing something...

When I pause a cut, with my new screen, I am not able to jog, using the same profile and switching to the 1024 set, it behaves as expected, that is I can jog, say for a tool change, and when I cycle start again, it goes to the correct place and resumes the cut.

I thought all "settings" were saved in the profile? Don't know what I am missing...probably something simple!

Re: Jogging during pause
« Reply #1 on: January 16, 2016, 09:57:27 AM »
Found the answer...for those that don't know...must have the Jog On/Off button on every screen!

Hmmmm....can I put it on the persitant screen for the same effect?

Offline ger21

  • *
  •  6,287 6,287
    • View Profile
    • The CNC Woodworker
Re: Jogging during pause
« Reply #2 on: January 16, 2016, 10:56:31 AM »
Being on the persistent screen, in effect puts it on every screen, so yes.

2010 Screenset

JointCAM Dovetail and Box Joint software