Hello Guest it is July 01, 2022, 03:24:02 AM

Author Topic: Please Help me with my probe contact problem  (Read 167 times)

0 Members and 1 Guest are viewing this topic.

Please Help me with my probe contact problem
« on: December 26, 2021, 12:29:16 PM »
I have a mach3 machine (router) without a controller (the PC is the controller).
I have used a probe on pin 12 for 4-5 years with no problem. It made contact with the spindle/tool.
Now I have moved my workshop location and the probe doesn't work anymore.
I have reviewed all connections.
The most unbelievable thing is that I now get an intermittent "digitalize" contact when the machine is off.
If I energize the machine, it makes no contact...
Please, does anyone have this and can you help?
Thank you
Francisco Motta from Brazil