Hello Guest it is November 12, 2019, 11:13:00 PM

Author Topic: Boring with Mach3  (Read 2662 times)

0 Members and 1 Guest are viewing this topic.

Boring with Mach3
« on: November 28, 2015, 06:58:19 PM »
Hi,

My first attempt at boring with Mach3.

OD and ID profiles programmed with HSMWorks.  HSMWorks cannot handle boring on the far side of the centreline, so I had to post code for the near side of the centreline, then use NotePad to do a global search and replace for all values of "X" with "X-"

Worked a treat.

Material is PVC.  End product is an Ultrasonic transducer housing.

https://www.youtube.com/watch?v=Zxp-k4pQKTU

Offline Tweakie.CNC

*
  • *
  •  7,984 7,984
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Boring with Mach3
« Reply #1 on: November 29, 2015, 01:51:02 AM »
Excellent work Chris.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.