Hello Guest it is March 29, 2024, 11:56:39 AM

Author Topic: Tab Feature  (Read 3313 times)

0 Members and 1 Guest are viewing this topic.

Tab Feature
« on: May 20, 2007, 10:51:44 PM »
Brian,
I've been using LazyCam Pro with success. Thanks for the great product.
I was wondering if there were plans in the future for adding a tab feature to the program.
Mike
Re: Tab Feature
« Reply #1 on: May 21, 2007, 12:33:51 AM »
Hello Mike,
I added the tools to calc the points in the path where the tabs should be... now I just need the time to change the drawing class to show the tabs and so on.

Thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Tab Feature
« Reply #2 on: May 21, 2007, 04:15:16 PM »
That would be such a great feature.

Q
Re: Tab Feature
« Reply #3 on: May 22, 2007, 12:46:46 AM »
it will be very cool :)

If you select the tool path and press the S button you will see my tool for testing points on path math ;)

Press S again to turn it off...
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Tab Feature
« Reply #4 on: May 22, 2007, 02:47:20 AM »
Hi, Brian

Just tried it, Thats Cool just needs a couple of eye's, nose,.... and a tail "Rat Tracker" !!

It did lockup hear about half way through, Hears the Info.

Thanks, Chip
Re: Tab Feature
« Reply #5 on: May 22, 2007, 09:39:44 AM »
That is okay... it is just a tool at this point for testing the math that I have done, I have not added any error checking   :(
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com