Hello Guest it is September 30, 2023, 07:11:04 PM

Author Topic: E-stop error??  (Read 3533 times)

0 Members and 1 Guest are viewing this topic.

E-stop error??
« on: May 06, 2007, 09:32:10 PM »
Hello all,

I am getting an e-stop error as if a switch was activated. There is no pattern to this, it even happens when the machine is just sitting there. I have checked each switch in the diagnostic screen, and raised the debounce from 2000 to 3000. 
Any thoughts???


Offline Chaoticone

  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: E-stop error??
« Reply #1 on: May 06, 2007, 09:35:46 PM »
Sounds like it could be a noise problem.

;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: E-stop error??
« Reply #2 on: June 30, 2007, 12:48:41 PM »
i have the same problem did you get it fixed could you help me out
Re: E-stop error??
« Reply #3 on: July 20, 2007, 06:58:57 PM »

The problem is, what kind of noise is coursing this problem.
If it is a spike or puls from a quit high frequency what is coursing is problem, you can try to solder a 5nF capacitor paralel on the switch or even better as near as possible on the computer or breakoutboard.
But it even couldt be a bad connection.