Author Topic: ISO 30 Tool holder tray  (Read 1580 times)

0 Members and 1 Guest are viewing this topic.

Offline JamesCrombie

  • Holding
  • Posts: 2
    • View Profile
ISO 30 Tool holder tray
« on: April 23, 2016, 11:53:31 AM »
I designed and built a couple of these to use with out 4x4 CNC router with a ATC.  This one does not have the rubber edging around the holes yet.  I used a 1/16" wall rubber channel I found at an auto glass shop.  Usually used on glass or plastic windows.  Powder Coated after assembly.
Assembled with 6-32 press in flushnuts and screws, but pop rivet or screws and nuts would work as well.

James