Hi Guys, how would I make my macro if these were the steps I wanted? For a tool changer, I have 8 inputs on my c23 board for each tool change position. inputs 1 - 8 = tool 1 - 8
goto z0.2 (machine coordinates)
activate output 6
wait for signal on input 1 (high) for tool 1 ( and input 2-8 if I want tools 2 -
(it is an 8 station tool changer)
if signal is not seen within 20 secs, e-stop and alarm and stat (tool changer not sensing input)
then deactivate output 6
Update current tool to selected tool, and tool offset
resume program,
Any help guys?>