I am in the process of setting up my lathe tool turret
I am using small stepper motor, an encoder and using Pokeys 57E
I have a button via Pokeys calling a macro controlling the operation.
In the macro I have G01 code controlling the movement with a high
feed rate F900. I need this high a feed rate because of the turret gearing
It all works as expected except when I first load up mach and try it
at this point it appears to use the feed rate in feed DRO.
It completes the cycle ok but way to slow.
Once it has completed one cycle it seems to follow the macro perfectly.
Does anyone have any ideas on what could be influencing the first cycle
Any ideas would be greatly appreciated
cheers George