Hello Guest it is September 25, 2023, 02:58:50 AM

Author Topic: gcode issue  (Read 2078 times)

0 Members and 1 Guest are viewing this topic.

gcode issue
« on: July 31, 2015, 03:30:40 PM »
I have a problem when I run this gcode program it will only go to line 483 and stop there instead of going to the end. Even if I try to look at it in the window its open again it only goes to line 483 and stops but if I hit the edit gcode button I can see the g code all the way to the end of the line which is 761. Not sure if this is a Mach 3 issue or bobcad issue. Thanks


Offline ger21

  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: gcode issue
« Reply #1 on: July 31, 2015, 03:39:48 PM »
You need a Mach3 license to run all of the code.

2010 Screenset

JointCAM Dovetail and Box Joint software
Re: gcode issue
« Reply #2 on: July 31, 2015, 04:31:22 PM »
Thanks...I have a license I guess I did not install it correctly?

Re: gcode issue
« Reply #3 on: July 31, 2015, 04:41:07 PM »
You were right Thanks lol sorry pretty nooobish of me...Reinstalled all is well.