Hello Guest it is March 28, 2024, 10:42:51 AM

Author Topic: Pendant Setup with C32 BOB  (Read 1706 times)

0 Members and 1 Guest are viewing this topic.

Pendant Setup with C32 BOB
« on: June 22, 2015, 08:20:23 PM »
One last thing to get my new machine working and complete......The Pendant

Mach3
CNC4PC C32 BOB
Standard MPG using DB25

Got the pendant working on a limited basis. No matter what position the switches on the pendant are set to, the X axis moves. Also, the distance for each click is the same regardless if it is set on 1, 10, or 100. I know that the system is seeing the pulses because on the Settings page under the MPG area the velocity and count moves whenever I rotate the pulser.

What would you suggest I look at or maybe some screen shots of your setup if you think it will help.

needonemoretool
Re: Pendant Setup with C32 BOB
« Reply #1 on: June 28, 2015, 11:08:40 AM »
Did you add the brians from the directions from cnc4pc? Or use th plugin?
Don
« Last Edit: June 28, 2015, 11:10:15 AM by DonMarkey »