Hello Guest it is March 29, 2024, 05:25:15 AM

Author Topic: Using mach 3, trucut, and an oxy fuel torch.  (Read 2072 times)

0 Members and 1 Guest are viewing this topic.

Using mach 3, trucut, and an oxy fuel torch.
« on: December 23, 2015, 09:45:12 AM »
Hello all. I have a trucut machine with mach 3. I have been previously using a hypertherm 85 to cut and it has been working fine but i have recently put a oxy fuel torch on the gantry but to be quite honest i have no idea how to operate it. Im fairly new to the cnc world and if anyone could help me get this thing up and running it would be much appreciated.

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Using mach 3, trucut, and an oxy fuel torch.
« Reply #1 on: December 23, 2015, 10:16:24 AM »
It works in the same manner that the plasma unit did. The main difference is you must do a preheat cycle before cutting starts. That is normally all programmed by the CAM program. 

(;-) TP
Re: Using mach 3, trucut, and an oxy fuel torch.
« Reply #2 on: December 23, 2015, 11:50:12 AM »
I tinkered with it and got it to work eventually. Thank you
Re: Using mach 3, trucut, and an oxy fuel torch.
« Reply #3 on: January 19, 2016, 03:44:40 PM »
I am very new to building cnc plasma table , although i have ran Messers titan version productively . My real question here has anyone seen any videos of setting up a oxy fuel setup with mach.