Hello Guest it is March 28, 2024, 12:33:50 PM

Author Topic: Probably simple but...(G-Code help)  (Read 24693 times)

0 Members and 1 Guest are viewing this topic.

Offline Davek0974

*
  •  2,606 2,606
    • View Profile
Re: Probably simple but...(G-Code help)
« Reply #90 on: January 16, 2016, 10:44:11 AM »
You can leave it that way IF you want OR you can change it back to use the initial move. Setup / portPins/Millsetup   THC settings , check teh box initial move for G28.1.

Personally I like the initial rapid move, but you have teh choice.

(;-) TP

So thats the reason :)

I will try that and see which one i like best, thanks.

Offline Davek0974

*
  •  2,606 2,606
    • View Profile
Re: Probably simple but...(G-Code help)
« Reply #91 on: January 17, 2016, 07:08:28 AM »
Everything working very nicely now, the new set origin button code is faster and does not mess the DRO's up :)
I also now have the Z rapid to slow position during a G28.1 move.

I think this thread has served its purpose well, thanks go to BR549 for all the help, and to any others who chipped in.

A short video of the final setup making a couple of cuts...
https://www.youtube.com/watch?v=FV6WpuQjFE0