Hello Guest it is March 28, 2024, 11:30:43 AM

Author Topic: Z Axis not moving afer loading GCode  (Read 5171 times)

0 Members and 1 Guest are viewing this topic.

Re: Z Axis not moving afer loading GCode
« Reply #10 on: May 12, 2015, 03:19:16 PM »
I don't see any problems with it here.   R3.043.022
All appears to work well (nice rack too !).
Maybe someone else will have a look and chime in.
Regards,
Russ

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Z Axis not moving afer loading GCode
« Reply #11 on: May 12, 2015, 09:09:36 PM »
IS this a LPT version or an outside controller version ?

NcUsbPod-XHC-Mach3-USB-Motion-Card    >>>

GUYS you really need to ASK about the controller UP front or spend time running in circles . The NCpod has been obsolete for years now and it never worked 100%.

Just a thought, (;-) TP

(;-) TP
Re: Z Axis not moving afer loading GCode
« Reply #12 on: May 13, 2015, 09:27:17 AM »
Good point TP, will keep that in mind, thanks.

btw .... where did you find "NcUsbPod-XHC-Mach3-USB-Motion-Card    >>>" ? ? ?

I didn't see it in any post ... or the xml. ? ? ? ?

Thanks,
Russ

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Z Axis not moving afer loading GCode
« Reply #13 on: May 13, 2015, 12:10:41 PM »
IT IS in the XML (;-)


</Preferences>
- <Mach3Mill>
  <WPVB>680</WPVB>
  <WPVT>13</WPVT>
  <WPVL>219</WPVL>
  <WPVR>1225</WPVR>
  </Mach3Mill>
- <Control>
  <Device>NcUsbPod-XHC-Mach3-USB-Motion-Card</Device>
  </Control>
- <VideoPlugIn>
  <DROcolor>0</DROcolor>
  <TOOLcolor>8421440</TOOLcolor>
  <CROSScolor>4194304</CROSScolor>
  <ShowTool>1</ShowTool>
  <ShowMousePos>1</ShowMousePos>
  <ShowAxisPos>1</ShowAxisPos>
  <ToolDia>0.5</ToolDia>
  <ScaleFactor>2.e-003</ScaleFactor>
  <FlipAxis>0</FlipAxis>
  </VideoPlugIn>
- <Pod>
  <DripSel>0</DripSel>
  <GBufTime>512</GBufTime>
  <FSlect>16</FSlect>
  <HomeLimitEn>0</HomeLimitEn>
  <Config>1</Config>
  <PulsCntPeroate>2</PulsCntPeroate>
  <Homing>1</Homing>
  <pulseHz>4</pulseHz>
  <XPullOff>5.0000</XPullOff>
  <YPullOff>5.0000</YPullOff>
  <ZPullOff>5.0000</ZPullOff>
  <APullOff>5.0000</APullOff>
  <BPullOff>5.0000</BPullOff>
  <CPullOff>5.0000</CPullOff>
  </Pod>


(;-) TP
« Last Edit: May 13, 2015, 12:12:54 PM by BR549 »
Re: Z Axis not moving afer loading GCode
« Reply #14 on: May 13, 2015, 01:40:54 PM »
OK ... I see it now. Totally overlooked it,  ::) thanks TP.