Hello Guest it is May 22, 2024, 08:36:41 PM

Author Topic: Need info on 5045 Controllers, have 2 will not hold load?  (Read 1472 times)

0 Members and 1 Guest are viewing this topic.

Need info on 5045 Controllers, have 2 will not hold load?
« on: April 29, 2015, 06:32:11 PM »
Hi,

I had two 5045 stepper controllers go bump at the same time.

they will come live, green LED, as soon as I put a load, any movement command, they pop over to red.

does anybody have a fix/repair

they were running at 48VDC at 3amp, motors Nema24 4.2 N.m