Hi All
Got some news:
1-I mount the machine on force power -380V
2-test and move all Axis X,Y,Z except the C for ATM, the old config of this C Axis was trough the RS 232 from the old cnc (I intend to use for this one encoder direct- need the drive one new set-up fotr this ? wait your opinion about)
for time I made all of this without to mount the csmio or Mach, is made direct from the cabinet Inputs/Outputs
3-test the Emergency Chain : mushrooms buttons, limit switches, vacuum chain, pressures, cabinet emergency switches
Unfortunate got no time to test the spindle heads & the inverter
So the
point 3. From Thomas rules is not yet accomplished (hope this week to finish with the spindle and test all outputs-mean the secondary, drills , block units for 0 home on corners etc.
I will post some pics with:
Limit switches on Axis C, Z,Y,X and secondary drills location/sense of rotation.
QUESTION :
When I need to add Input from csmi-o on the Brain controls how I must to declare the csmio address ? see the attach .