Third party software and hardware support forums. > CS-Lab
Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
TPS:
in a Standard Installation they are for example in C:\Mach3\Macros\Mach3Mill
if they are not in your profilefolder, you can copy them from there.
slvm:
Hi
I install mach on new pc, but the result is the same the codes for coolant are not under the macros directory; if you can help me to create some codes for my CNC it is ok, if you are busy and I disturb sorry !
I need some simple macro codes for engage and disengage some outputs, that's all....
Of course for help let me reward in some how your work.
thank you in advance.
TPS:
sorry i was wrong, there are no macro's for this Standard functions,
you only have to define the Outputs in Port's&Pins -> spindle Setup
and then in ports&pins -> Outputs your real CSMIO outputs
Navigation
[0] Message Index
[*] Previous page
Go to full version