Third party software and hardware support forums. > CS-Lab
Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
slvm:
HI ALL
I start the post to find/share info with experimented user who have already retrofitted Machines with Analog servo-drives.
I intend to retrofit my CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A Motion Controll under Mach 3
Reasons:
1-to old and expensive controller (the CNC was dead and cost a lot the replacement), to be free from dedicated systems slavery .....(you know what I mean....) ;)
To bring the machine on year 2015 I intend to use following:
1-Mach 3
2-CSMIO-IP-A Motion Controll
3-My PC with 2 operation system; one for design and the other one for operator- splitted on 2 SSD OCZ systems,
Processor Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz base score on win 7-64 Bit 7.1
Memory (RAM) 8.00 GB base score on win 7-64 Bit 7.5
Graphics NVIDIA GeForce GTX 460 base score on win 7-64 Bit 7.6
Gaming graphics 4095 MB base score on win 7-64 Bit 7.6
Total available graphics memory 7.6
Ssd 64 GB + Ssd112GB Total) base score on win 7-64 Bit 7.9
machine is featured with:
big vacuum table 2600x1300 mm ; splitted on 2 zones; multi drill heads on separate spindle 7 vertical and 2 orizontal X,Y drills...(I have already headicks on Brain - controlls :'()
4 servo analogue drives for main Axis XYZ + ATM automated tool changer (8 tools here will be also a lot of tears by Brain design :'()
I try to attach some pics but it seems I'm to fresh here , or I made some mistakes on upload....
Hood:
Looks like a nice machine :)
Is the toolchange just a wine rack type setup or is it some other design?
I think maybe a macropump would be better than a brain for it but I suppose it depends how much you know about VB script.
Hood
slvm:
VB=oemLED (0)-
Tool changer is 8 item distributed to C drive who is (was) command on RS 232.
Got a lot of headick on VB script learning....More I read, more know that "I don't know nothing...." :'( :'( :'(
I will need some help for it....
new pics
I made one bench for Input signals (24V)
slvm:
cnc large ...pics
I read all your posts Hood ; it seems you are the best on CSMIO-IP-A retrofit.....
regards folks
Hood:
I am not the best at VB, in fact I am probably one of the worst :D
I muddle through and usually find a way to make things work but the script is far from elegant but at least it seems to work :)
Can you explain the sequence of your tool changer a bit more. What I/O does it require? Is it a servo motor controlling it?
Looks like a nice computer, bit of overkill for a CNC controller though :D
I would keep that computer for my designing (CAD/CAM ) and just build a simple one for the CNC control.
Is that a Corsaid case? Just got myself a Corsair Air540 for my home computer, it is a superb case :)
Hood
Navigation
[0] Message Index
[#] Next page
Go to full version