Hello Guest it is January 21, 2021, 09:50:05 AM

Author Topic: I HAVE A PROBLEM "gldraw1"  (Read 2074 times)

0 Members and 1 Guest are viewing this topic.

I HAVE A PROBLEM "gldraw1"
« on: April 13, 2007, 05:17:12 AM »
Hello. I have a problem whit LazyCam. I insert the file .dxf in the program, select the push-button Set Layer Depth and appears the written "Unrecoverable error in the file gldraw1 contacts artsoft". My PC is an Athlon 2.0 Ghz 512 M ram, video card on board whit 128 M ram. The program works well on an other PC Pentium Intel 2,8 G. Why this problem? Best regards Luca.

Offline Chip

  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: I HAVE A PROBLEM "gldraw1"
« Reply #1 on: April 13, 2007, 06:40:19 PM »
Hi, Luca

I'v had the same problem on my computer, it's some sort of video driver problem so-thy say.

Just enter the values in the right lower "Selected Layer" window, Lot's of changes to LC soon.

Hope this Helps, Chip
Re: I HAVE A PROBLEM "gldraw1"
« Reply #2 on: April 14, 2007, 09:54:53 PM »
We hope to have all that fixed with the new interface!

Thank you for telling us about the problem
Fixing problems one post at a time ;)