Hello Guest it is April 19, 2024, 09:07:42 AM

Author Topic: Here is a video of my CNC router  (Read 13544 times)

0 Members and 1 Guest are viewing this topic.

Re: Here is a video of my CNC router
« Reply #10 on: May 08, 2007, 01:28:24 PM »
Hello Benny

Very nice machine and a lot of good work . Thank you for the nice photos

Marcel
Re: Here is a video of my CNC router
« Reply #11 on: May 08, 2007, 03:17:43 PM »
Hi Benny,

A lot of creativity into your machine. Could you, please, explain me what are those wall aquariums? How they are built, and how is built the entirely assembly - wall/aquarium? I never seen such a thing in reality but can not imagine how you mount the aquarium in the house wall and still have access to feed the fishes, change water, etc. Could you, please, explain how the whole thing is built and used?

Thank you.

Zoltan

ynneb

*
Re: Here is a video of my CNC router
« Reply #12 on: May 11, 2007, 06:43:52 AM »
Hi Zoltan, it would be too difficult to describe how to build one in words. I dont have any drawings to show you either.
One thing I can tell you is that they sit on the wall, and not in the wall. You feed and clean from the top. The light is just suspended with a piece of glass.
The tank sits on a piece of angle iron that is bolted into just two wall studs.
I hope that helps.