Hello Guest it is March 28, 2024, 05:15:33 AM

Author Topic: Advanced Acceleration and Shape Control  (Read 2094 times)

0 Members and 1 Guest are viewing this topic.

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Advanced Acceleration and Shape Control
« Reply #1 on: February 10, 2015, 05:19:54 PM »
There are somethings in that article I disagree with.

as to your question SURE THERE IS. Properly engineer your machine in reguards to Accelleration . AND if you are running servos PROPERLY tune them for optimum accuracy AND acelleration.

Most hobby systems are not even close to being optimum on acelleration therefore they suffer performance and accuracy wise.

Second is requards to stiffness of design . The stiffer the better weak limpy sytems absorb motion energy therefore distort the true shape of what it being cut.

Just a thought, (;-) TP