Hello Guest it is March 28, 2024, 07:53:06 PM

Author Topic: Auto Tool Changer help....!  (Read 1845 times)

0 Members and 1 Guest are viewing this topic.

Auto Tool Changer help....!
« on: January 31, 2015, 04:03:03 PM »
Hi all,

Still very much a newby here, but I'm wanting help with setting up my Auto Tool Changer.  It's a Kress 1050 Spindle and Usovo
ATC, with 8 positions.  I also have a tool-length sensor mounted close to the 8 way tool rack.

I'm also using Sheetcam v6.0.15, with the Mach3 post.

Does anyone have a similar ATC and tool-sensor that could assist with some settings for Mach3?  I can obviously change the
positions of the individual toolholders.

Many thanks
Keith

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Auto Tool Changer help....!
« Reply #1 on: February 02, 2015, 03:48:20 PM »