Hood,
I use Bobcad in Solidworks.
I started to modify the post processor.
A test tapping 4 holes, output the nc below.
I have not tried this on the machine yet.
Is this what you mean??
N03 M06 T6
N04 S1857 M03
N05 G00 G90 G54 X11.5 Y11.5
N06 G43 H6 Z2.54 M08
N07 G98 X11.5 Y11.5 R3.
N08 M84 P0,9999 Q9,07874011993408 S1857 R3714
N09 X20. Y25.
N10 X40. Y5.
N11 X50. Y20.
N12 M09
N13 M05
N14 G53 Z0.
N15 G53 Y-1 X0.
N16 M02
(END OF PROGRAM)
N17 M30
%