Hello Guest it is March 29, 2024, 09:10:42 AM

Author Topic: Rotational speed  (Read 15677 times)

0 Members and 1 Guest are viewing this topic.

Re: Rotational speed
« Reply #10 on: January 26, 2015, 07:41:13 AM »
So there is no "Correction Diameter" box. It's all about setting the steps correctly?

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Rotational speed
« Reply #11 on: January 26, 2015, 11:11:03 AM »
YES there is a  Rotational axis correction DRO . IT IS used to blend the velocities of XY to the rotary on a combined move.

The Point I am making is you cannot just change the " steps per " to change the velocity. That part MUST be set as per the hardware so that mach3 can move correctly.

(;-)TP