Hello Guest it is March 28, 2024, 04:52:24 AM

Author Topic: Live feed gcode into mach3 - is there a plugin / vbscript / c++ code?  (Read 7882 times)

0 Members and 1 Guest are viewing this topic.

Re: Live feed gcode into mach3 - is there a plugin / vbscript / c++ code?
« Reply #10 on: January 18, 2015, 03:42:51 PM »
Terry,

Except, unless I'm mistaken, loading a new program will turn off the spindle and coolant, etc., and you'll lose a lot of "state".

Regards,
Ray L.
Regards,
Ray L.

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Live feed gcode into mach3 - is there a plugin / vbscript / c++ code?
« Reply #11 on: January 18, 2015, 05:24:13 PM »
HIYA RAY, I don't think that is a problem .  IF you turn off all the cancel functions in General config I believe everything stays intact. At least with a quick test it did.

I will have to run a full test tonight to see IF it does.

(;-) TP