Hello Guest it is December 13, 2019, 05:48:03 AM

Author Topic: Need Help With NC Studio to Mach 3 conversion  (Read 1489 times)

0 Members and 1 Guest are viewing this topic.

Need Help With NC Studio to Mach 3 conversion
« on: January 17, 2015, 07:03:19 PM »
I am new to the world of cnc and have bought a J Cut 25s I want to convert it to run on Mach 3. I have replaced the BOB with a UG08 and UC300 from CNC 4 You to run from a Windows XP Laptop with a usb port. I have the rewiring part finished and installed Mach 3 and the drivers for the UC300 but I can't get the machine to move on any axis. I would really appreciate any help as i have tried everything I can think of ???

Thank you in advance.

Offline RICH

*
  • *
  •  7,378 7,378
    • View Profile
Re: Need Help With NC Studio to Mach 3 conversion
« Reply #1 on: January 17, 2015, 08:53:33 PM »
Not familar with the UC300, but, do a search on it and you will find some posts about using that controller.
The posts were rather recent and some users have had problems wih it .

You may also want to try  the driver test for that laptop and see how well it will works with Mach.

RICH