Hello Guest it is March 28, 2024, 06:22:26 PM

Author Topic: Need a 4 axis controller board  (Read 5379 times)

0 Members and 1 Guest are viewing this topic.

Re: Need a 4 axis controller board
« Reply #10 on: January 12, 2015, 03:40:36 PM »
I know that to mention Chinese stuff is frowned upon, but it is not all bad. There are some nice driver boards using the new Toshiba 6600 chip with a large 2" x 2-14" X 5/8" heat sink, and they are rated at 4.5 amp, 48v. They have settable amps, and up to 16 micro-steps, and cost about $28.00 each for a single axis driver. Look on Ebay. http://www.ebay.com/itm/New-Product-4-5A-TB6600-stepper-motor-driver-board-/290901201259

John


Re: Need a 4 axis controller board
« Reply #11 on: January 12, 2015, 03:47:01 PM »