Hello,
I have built small coil winding machine whose wire guide is controlled using x,y and z axis of mach3. The spindle is servo motor controlled on A axis. While winding my g code goes like,
G0 A0Y0
G0A30Y10 layer 1
G0A60Y0 layer 2
G0A90Y10 layer 3
G0A120Y0 layer 4
and so on.
The problem is at every end spindle stops with defined accn and dccn time which is very time consuming.
How can I continuously run the spindle without stopping at the end of every layer?
pl help.
deepak