Hello Guest it is September 24, 2020, 11:39:56 PM

Author Topic: Galil setup with Mach 3  (Read 3678 times)

0 Members and 1 Guest are viewing this topic.

Galil setup with Mach 3
« on: July 21, 2016, 04:11:10 PM »
I am new to Mach 3 and I am look for information on setting it up with a Galil board. Is there a how to or tutorial available? This is on an older large format routing table and we are wanting to upgrade the 16 year old software.
Re: Galil setup with Mach 3
« Reply #1 on: July 25, 2016, 10:56:05 AM »
I have managed to configure the XY & Z axis and they just need some minor tweaking for accuracy and maximum speed. I have not yet been successful in activating the spindle, vacuum table, or misters.
Re: Galil setup with Mach 3
« Reply #2 on: September 24, 2020, 08:00:08 AM »
First, you have to install plug-in for Galil setup with Mach 3. Then click the mp3 file for the correct mach location. If the plug in does not appear in the menu, you can check Galil history for this. I have best dissertation service for further information related to this. You can check it.