Hello Guest it is March 28, 2024, 05:17:25 AM

Author Topic: Safe Z Not Working...  (Read 2198 times)

0 Members and 1 Guest are viewing this topic.

Safe Z Not Working...
« on: September 19, 2014, 05:10:23 PM »
Ok, so i am fighting an Auto Z problem, see my other post, and i noticed another problem with Mach3 today.. Is this software just this buggy or what???

So i have Safe Z turned on, and its set to retract to +3.00 when stop is pressed. So i was testing it and noticed it doesn't work anything like i thought it would.

Running some code and its moving around, click Stop, the axis's stop moving, the bit retracts to +3.00 above Zero, awesome i thought, but when i click Cycle Start to continue where it left off the bit stays at +3.00 for the rest of the program cycle. Why doesn't it automatically go back down to Zero and then to the working depth and continue???

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Safe Z Not Working...
« Reply #1 on: September 19, 2014, 06:01:38 PM »
I replied to your posts at CNC Zone.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Safe Z Not Working...
« Reply #2 on: November 14, 2014, 02:30:09 AM »
i have the same problem! please someone to help me! to contact me me please!