I have hooked up my ModIO and wired the MPG. The MPG works
fine if you turn the handle really slow, about 1 click per second
max, in single step mode. If you spin the MPG at about 10 clicks
or so per second, nothing happens. The Mach DRO's don't even
display a change of position.
The ModIO LCD displays a count from the MPG in the
upper right hand corner. This count is in hexadecimal with 4 counts
per click of the MPG and it is accurate no matter how fast you
turn the MPG handle.
So it seems that the ModIO is counting just fine but not able to
transfer the data to Mach unless you turn the MPG really slow.
I messed with settings for 2 hours and just can't figure it out.
I read through the ModIO manual thoroughly and made sure my settings
were just as pictured in the manual.
Any ideas?
Scott
Here are some screen shots showing my settings.