Hello Guest it is March 29, 2024, 10:40:54 AM

Author Topic: Arc Wizard  (Read 5398 times)

0 Members and 1 Guest are viewing this topic.

Offline Keith

*
  • *
  •  187 187
    • View Profile
Arc Wizard
« on: September 29, 2014, 05:47:51 PM »
Can anyone explain the arc wizard by Brian Barker to me. I've attached a .dxf file (and yes, I know I could use that to do the cut but since lazy cam freezes my machine...) and the arcs I want to make are in 'red'. If you could use these arcs and apply it to the qualities needed to be filled in on the arc wizard window, I think I can then make sense of it.

The cut is centered between two other arcs (in black) and I'll be using a .0625" mill end which will cut past those black arcs outside the red ones.
Thanks, Keith

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Arc Wizard
« Reply #1 on: September 29, 2014, 07:05:15 PM »
Pic of arc geomertry. Play around with the wizard..........have fun.
RICH