Hello Guest it is March 29, 2024, 03:44:14 AM

Author Topic: Timer Variations  (Read 2992 times)

0 Members and 1 Guest are viewing this topic.

Timer Variations
« on: March 26, 2007, 03:30:57 PM »
I am trying to time how long it takes to run a part using Mach 2 by keeping an eye on the timer. It is very inconsistent and seems to jump back and forth. Any info on how the clock functions would be appreciated. Does the time run until the program finishes?

Thanks
Re: Timer Variations
« Reply #1 on: March 27, 2007, 09:27:34 AM »
Use Mach3 and I think you will find that it works better :)
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Timer Variations
« Reply #2 on: March 29, 2007, 02:38:18 PM »
The for the reply, but we are using a Tormach and I don't think they have sent out an upgrade to Mach 3 yet.
Re: Timer Variations
« Reply #3 on: March 30, 2007, 02:46:45 PM »
I see :(

I know they are working on it and they will not release till they are happy with how it works.
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com