Hello Guest it is March 28, 2024, 10:26:58 PM

Author Topic: G Code movement interrupted by an input.  (Read 2368 times)

0 Members and 1 Guest are viewing this topic.

G Code movement interrupted by an input.
« on: August 14, 2014, 08:23:28 PM »
Hi there. A simply newby question: Is it possible to interrup the GCdde vel constant movement of an axis by an external signal and then continue the movement with a constant desaceleration.
Thanks in advanced.

Offline Fastest1

*
  •  920 920
  • Houston, TX
    • View Profile
Re: G Code movement interrupted by an input.
« Reply #1 on: August 24, 2014, 01:44:48 PM »
Of just a single axis? Or all? And why?

Btw, I would think yes as to changing it for all axis simultaneously. Not sure of the ability with a single axis.
I want to die in my sleep like my grandfather, not like the passengers in the car! :-)
Re: G Code movement interrupted by an input.
« Reply #2 on: August 24, 2014, 08:23:01 PM »
>Of just a single axis? Or all? And why?
For all axis. It is a pick & place machine resolved by CNC: MACH3, AKZ250, Delta Servo drivers & motor.

>And why?
I need to change the movement in answer to a proximity sensor signal mounted in the hand.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: G Code movement interrupted by an input.
« Reply #3 on: August 24, 2014, 08:34:01 PM »
Have your sensor call the feedhold button.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html