Hello Guest it is March 29, 2024, 03:41:33 AM

Author Topic: Can Mach3 be run with Mach2 driver??  (Read 4777 times)

0 Members and 1 Guest are viewing this topic.

Can Mach3 be run with Mach2 driver??
« on: March 24, 2007, 11:54:30 PM »
Can Mach3 be run with Mach2 driver?? 

Thanks
Werner

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Can Mach3 be run with Mach2 driver??
« Reply #1 on: March 25, 2007, 02:04:49 AM »
Hi, Werner

No, but both can co-exist on your computer, Allowing Mach2 and Mach3 to be used.

Hope this Helps, Chip
Re: Can Mach3 be run with Mach2 driver??
« Reply #2 on: March 25, 2007, 09:15:17 PM »
Hi Chip,
Is it no problem to have two drivers in the device manager for Mach2 and Mach3?
Thanks
Werner

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Can Mach3 be run with Mach2 driver??
« Reply #3 on: March 25, 2007, 09:27:00 PM »
Hey Werner,
   That should be no problem. :)

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Can Mach3 be run with Mach2 driver??
« Reply #4 on: March 25, 2007, 10:34:11 PM »
Cool I will give it a try!!
Thanks Guys
Werner  :)

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Can Mach3 be run with Mach2 driver??
« Reply #5 on: March 26, 2007, 08:07:10 AM »
Hey Werner, I just read your post again. You can have one driver for Mach 2 and one driver for Mach 3, not two for each. Just makeing sure we are on the same page.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Can Mach3 be run with Mach2 driver??
« Reply #6 on: March 26, 2007, 11:37:22 AM »
Hi Bret,
I think we are on same page.  I had one for Mach2 and one for Mach3.  But could not get Mach3 working.
Thanks ???
Werner

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Can Mach3 be run with Mach2 driver??
« Reply #7 on: March 26, 2007, 12:00:48 PM »
Quote
But could not get Mach3 working.

Could not or have not? Is it working now?

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Can Mach3 be run with Mach2 driver??
« Reply #8 on: March 26, 2007, 02:52:38 PM »
Hi Brett,
Day seven and still no luck!!  ??? Please go to the stepper thread and you will see what I have been up to.

Thank Buddy
Werner