Hello
Guest
it is
April 19, 2024, 10:12:24 PM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
Mach Discussion
/
General Mach Discussion
/
Trying to use Mach 3 with EngraveLab 5
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: Trying to use Mach 3 with EngraveLab 5 (Read 3402 times)
0 Members and 1 Guest are viewing this topic.
signtrainer
2
Trying to use Mach 3 with EngraveLab 5
«
on:
March 15, 2007, 10:25:06 AM »
I am new to Mach 3 and am trying to use it with EngraveLab 5 as the DXF file creation software. So far not much luck. I seem to not be finding the CORRECT filter, since my .25" depth goes to 3/4 inch. Up Z for travel becomes DOWN Z.. and it moves in 100ths of an inch on real time travel which takes 20 minutes to make a 3 inch letter " T "
I suspect I am doing something wrong ....
Richard
Logged
Brian Barker
3,859
Re: Trying to use Mach 3 with EngraveLab 5
«
Reply #1 on:
March 18, 2007, 09:58:17 AM »
Are you using Lcam to convert the DXF to Gcode? If so I think you need to see the Lcam video on the Videos page.
Thanks
Brian
Logged
Fixing problems one post at a time
www.newfangledsolutions.com
www.machsupport.com
signtrainer
2
Re: Trying to use Mach 3 with EngraveLab
«
Reply #2 on:
March 18, 2007, 03:42:37 PM »
Actually , I have made progress. I am now using SignLab 7 with the Engravelab module. I find it working better, but still dosen't pass along proper depth, and speed settings.
Logged
Print
Pages:
1
Go Up
« previous
next »