Hello Guest it is March 01, 2021, 03:19:13 PM

Author Topic: spindel speed pulse count setting  (Read 3146 times)

0 Members and 1 Guest are viewing this topic.

spindel speed pulse count setting
« on: November 06, 2005, 06:45:17 PM »

well  i am sure i see it some where  but cant find it now

how do i tell  Mc 3  that i have 4 pulses per rev  if i go spindel calibrate i see box  but it wont let me  change value

i have looked all other places  but i cant see how i can  ajust this

any one help ?

regards Bill

Offline zarzul

*
  •  239 239
  • Wyoming, USA
    • View Profile
Re: spindel speed pulse count setting
« Reply #1 on: November 08, 2005, 01:01:57 PM »
Bill,

I think the program does this automatically but you have to have one of the pulses or slots 50% larger than the others.  I think it sees the pulse width of the large one and uses it as the index mark.