Hello Guest it is August 06, 2020, 05:28:06 AM

Author Topic: Can someone help with this error  (Read 3654 times)

0 Members and 1 Guest are viewing this topic.

Can someone help with this error
« on: January 19, 2014, 03:36:50 PM »
I have a fully licensed copy of Mach3 and recently installed the latest updates(a week ago). I ran the machine several times after that with no issue. Today I did a couple of jobs and then this error appeared when I clicked cycle start. The machine ran normal after clicking OK on the error. The message appears after the cycle is complete as well. Attached is a picture (I hope) of the error. Thanks in advance.
ERROR, #Expand File not found at:

Chuck

Offline Vogavt

*
  •  258 258
    • View Profile
Re: Can someone help with this error
« Reply #1 on: January 19, 2014, 03:55:06 PM »
Which version or Mach3 are you using?

I went looking for that path on my machine as it looked odd to me.

All my macros, i.e., *.m1s, are in macro folder and my *.set files are in the main Mach folder.

By the way, what screen resolution are you running on your PC?
The attached file, if it's a screen capture, is huge. 3264x2448 in size.
Since you reference the 1024.set, that's why I ask.
Maybe you did some photo editing to enlarge the snap shot, but I think for we'd be better served in the future, if you just typed out in the thread what the dialog box shows. You did do a portion of it, then we have to download a 3.5 meg file to see what your issue is.
Again, just for future reference.

For others, the dialog box in the screenshot states:

Error, #Expand File not found at:
C:\Mach\ScreenSetMacros\1024.set\Masters\Headers\CopyRightandLicenseNotice.m1s

Offline ger21

*
  • *
  •  6,282 6,282
    • View Profile
    • The CNC Woodworker
Re: Can someone help with this error
« Reply #2 on: January 19, 2014, 04:01:42 PM »
That's an error message from the MSM screenset. If you've uninstalled it, then you didn't uninstall it properly.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Can someone help with this error
« Reply #3 on: January 19, 2014, 04:01:59 PM »
Thanks for the reply, I am running version R3.043.066. Sorry about the picture, took it with my cell phone and did not change the resolution. I've posted before, but never a picture....I'll learn!
Re: Can someone help with this error
« Reply #4 on: January 19, 2014, 04:07:15 PM »
Not sure what MSM screenset is and I have not uninstalled any of the screensets. I have been using MachBlue probing big tex ver 3. I was switching back and forth between sets to see if that was where the error was coming from.

Offline ger21

*
  • *
  •  6,282 6,282
    • View Profile
    • The CNC Woodworker
Re: Can someone help with this error
« Reply #5 on: January 19, 2014, 04:23:00 PM »
MSM = MachStandardMill from Calypso Ventures.

You must have installed it at some point, as it's the only screenset I know of that will give you that error.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Can someone help with this error
« Reply #6 on: January 19, 2014, 05:52:33 PM »
Now the error actually shows up for every screenset I tried.

Offline ger21

*
  • *
  •  6,282 6,282
    • View Profile
    • The CNC Woodworker
Re: Can someone help with this error
« Reply #7 on: January 19, 2014, 05:55:32 PM »
Yes, but it's the MSM screenset that's causing it.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Can someone help with this error
« Reply #8 on: January 19, 2014, 06:25:21 PM »
You mentioned earlier that there was a proper way to uninstall it, can you help me out with that?

thanks
Re: Can someone help with this error
« Reply #9 on: January 25, 2014, 01:10:49 PM »
Gerry,
         Can you tell me what the proper method for uninstalling the screenset is?
thanks