Hello Guest it is June 27, 2019, 01:30:14 AM

Author Topic: Ismoving not working when feedholding a G83 command  (Read 2156 times)

0 Members and 1 Guest are viewing this topic.

Ismoving not working when feedholding a G83 command
« on: April 09, 2010, 11:23:11 PM »
Hi,

this problem happens when my code is running canned cycles (as G83) and press the feedhold buttom.
My feedhold button executes this macro

'FeedHold
DoOemButton(1001)
While IsMoving()
   Sleep (100)
Wend
SetUserLED(2001,1)
 
This routine works great when holding during a G0,G1,G2 etc, but when feedholfing a G83 the movement actually pauses but the Ismoving() never returns false, and the loop never exits

Any clue about what can cause this behavior?

Thanks
Re: Ismoving not working when feedholding a G83 command
« Reply #1 on: April 20, 2010, 08:22:46 AM »
HELLO OFFLINE:
       I am a beginner
      I  want turn on a led of the FEED HOLD on,it`s led is on ,please give me a example
file is the "m1001.mls"
thanks
gys16435@sina.com
Re: Ismoving not working when feedholding a G83 command
« Reply #2 on: January 21, 2014, 10:33:31 AM »
elpablito,
as you said.g83 is a canned cycle and mcodes don't work well in them.

allen, there's a standard led for pause/feedhold. OEM-code 80
Kenneth