Hello Guest it is March 29, 2024, 08:55:05 AM

Author Topic: How to - fixture save...without exiting  (Read 2633 times)

0 Members and 1 Guest are viewing this topic.

How to - fixture save...without exiting
« on: January 17, 2014, 05:48:09 AM »
I feel this may be redundant question, but after some search, can’t find answer to my question !

Is there any way I can have the fixture changed saved just like when exiting Mach where the FIXTURE CHANGED dialog box asking “fixture save?” question…..without exiting / closing Mach?!?
Tks

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: How to - fixture save...without exiting
« Reply #1 on: January 17, 2014, 07:26:26 AM »
On my 2010 Screenset, click the Save Offsets button on the Offset tab.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: How to - fixture save...without exiting
« Reply #2 on: January 17, 2014, 10:41:00 AM »
Thks Gerry....but !! [ had to ;-)..]

Why once I do just that, click the save offset button and then exit, Mach still ask through this dialog box....Fixture save?

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: How to - fixture save...without exiting
« Reply #3 on: January 17, 2014, 10:58:48 AM »
Un-check "Optional Offset Save" in the lower right corner of General Config.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: How to - fixture save...without exiting
« Reply #4 on: January 17, 2014, 11:24:06 AM »
Great.....that's what I was missing....!!!
No substitute to experience.....witch you obviously have  ;-)
Tks for your time
Later, Robert