Hello Guest it is March 29, 2024, 01:27:52 AM

Author Topic: movement is not smooth  (Read 5003 times)

0 Members and 1 Guest are viewing this topic.

movement is not smooth
« on: December 05, 2013, 02:19:56 AM »
I have a problem for galil 21xx + Mach3.
1. Install Mach3 V.3.043.066 on win xp2007.
2.install plugin galil 4.5
This a problem
When I run the G code (attach file) When tool moves along the curve, why machines are so spastic (or movement is not smooth), I suspect that when the run g code first, it will not be a problem. but to run g code for a long time (about 30 minutes) is not smooth moves.
  But the same g code to control fanuc it Ok.

thank you

udom
Re: movement is not smooth
« Reply #1 on: December 05, 2013, 02:20:41 AM »
attach file
Re: movement is not smooth
« Reply #2 on: December 05, 2013, 02:33:02 AM »
image for g code
Re: movement is not smooth
« Reply #3 on: December 14, 2013, 10:34:06 AM »
Hi.

Please help me
I am still not resolved


Thank you

udom

Re: movement is not smooth
« Reply #4 on: December 15, 2013, 08:29:40 AM »
Hi,

try using CV ( G64 ) in your G Code

look ahead at least 20 lines.

just a thought
alex
Re: movement is not smooth
« Reply #5 on: December 22, 2013, 08:31:37 PM »
I'm going to try.


Thank you
 udom.