Hello Guest it is December 03, 2021, 06:26:33 PM

Author Topic: Picture not okay....  (Read 7052 times)

0 Members and 1 Guest are viewing this topic.

Offline Hood

*
  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: Picture not okay....
« Reply #10 on: January 04, 2014, 08:59:03 AM »
What Revision  of Mach are you using?
Hood
Re: Picture not okay....
« Reply #11 on: January 04, 2014, 10:21:15 AM »
Hi,

Sorry i'm bad at this English... Can you explain in any other way what you mean?



Thanks!!

Offline Hood

*
  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: Picture not okay....
« Reply #12 on: January 04, 2014, 10:26:49 AM »
See attached pics.
Hood
Re: Picture not okay....
« Reply #13 on: January 04, 2014, 10:42:30 AM »
Hi,

Thanks! It is Version R1.83.027

Offline Hood

*
  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: Picture not okay....
« Reply #14 on: January 04, 2014, 10:48:41 AM »
That is probably 7 years old, would suggest you update. However I would suggest you do not use the latest version as it has quite a few bugs, best to get maybe to use this one.

ftp://anonymous@machsupport.com/Mach/Mach3Version3.043.062.exe
Hood
Re: Picture not okay....
« Reply #15 on: January 05, 2014, 07:22:46 AM »
Hi,

Thanks! Now it is updated but it works about 19sec and then it stops to engrave...

What is wrong or what have I done wrong?

Thanks!

-Thomas

Offline Hood

*
  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: Picture not okay....
« Reply #16 on: January 05, 2014, 07:28:23 AM »
That is strange, maybe something not quite right with the xml and the big jump in updates.
Can you attach the xml for the current setup so I can compare and see if there is an issue.
Hood
Re: Picture not okay....
« Reply #17 on: January 05, 2014, 07:33:36 AM »
Hi,

Here is the xml file.

Thanks!

Offline Hood

*
  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: Picture not okay....
« Reply #18 on: January 05, 2014, 07:38:14 AM »
Ah ok I see your problem right away.
You are using a pirated licence so Mach is treating your install as a demo so you are restricted to 500 lines of code amongst other things.

Hood
Re: Picture not okay....
« Reply #19 on: January 05, 2014, 07:40:42 AM »
What! I bought this machine from ebay 2 months ago and they told me that the mach3 software is not pirate...