Hello Guest it is November 19, 2019, 03:58:37 AM

Author Topic: Only running first 500 lines  (Read 1617 times)

0 Members and 1 Guest are viewing this topic.

Only running first 500 lines
« on: November 26, 2013, 11:27:40 AM »
Hi Guys,

Just ran first project in Mach 3 with a Cut3d Roughing file.

File doesn't complete - it stops at line 500 - is this due to my only having the Mach3 intro download or another issue?

Thanks!
Joe

Offline Tweakie.CNC

*
  • *
  •  8,002 8,002
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Only running first 500 lines
« Reply #1 on: November 26, 2013, 11:30:00 AM »
Hi Joe,

The demo version of Mach3 is limited to 500 lines of code so you can 'try before you buy'.  http://www.machsupport.com/licensing/

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: Only running first 500 lines
« Reply #2 on: November 26, 2013, 11:33:18 AM »
that's what I thought -  :)  thanks tweakie.