Hello Guest it is March 29, 2024, 02:54:03 AM

Author Topic: gcodes veering to the right when cutting return to zero is off that amount  (Read 2482 times)

0 Members and 1 Guest are viewing this topic.

cutting holes wants to veere to right every time 1/16 then to 1/8 when back to zero its off that amount have to zero every time help please
mach3 with axyz 4008 table

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Not really sure what you are meaning, it could either be backlash or missing steps. However as you say you have to re-zero then it sounds more like missed steps.
Hood
I put 2*3.5 vinyl rail to route pkt holes the more holes I route the more my hole are routed to the. Right of center whatever my holes are off my home is off the same amount and it is consistent. Y axis only to the right tuned motor different settings. And recalibrated!

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Well I am not really clear on what you are trying to explain but if I understand it does sound like you are losing steps. Try increasing the pulse width to 10 and reducing your acceleration and velocity by 50% and see if that helps.
Hood